This manual contains the information you need to install and use the IBM 16/4 Token-Ring Low Profile PCI Management Adapter.
Also on the CD-ROM are the installation aids, device drivers, and documentation for the adapter.
This manual is intended for use by network administrators and other end users of the IBM 16/4 Token-Ring Low Profile PCI Management Adapter who install token-ring adapter hardware and software.
Introduction to the IBM 16/4 Token-Ring Low Profile PCI Management Adapter describes the adapters covered in this manual, gives a checklist for installation, and describes some of the features of the adapters.
Installing the adapter hardware describes the procedure for installing the adapter into your computer.
Software installation describes the procedure for software installation for a number of network operating environments.
Problem solving describes troubleshooting procedures and fixes that might be needed for your environment.
Appendix A, CD-ROM content and software packages describes the files that are on the adapter CD-ROM.
Appendix B, NDIS 2 device driver parameters lists NDIS 2 parameters, describes their usage, and lists their values.
Appendix C, NDIS 2 device driver messages lists NDIS 2 system messages, explains the meaning, and lists user actions.
Appendix D, Notices lists the legal notices required for the IBM 16/4 Token-Ring Low Profile PCI Management Adapter.
Refer to these publications for additional information:
IBM adapter books and other documentation are available on the IBM Networking Web site:
http://www.ibm.com/networking